12027 Results: New & Used in Hand Tools in Australia

Sidchrome Australia Spanners.1/4- 1 1/4.Medium to Light use.

Sidchrome Aus 200mm Sidecutters/22mm Cold Chisel.

Almost new. 5 level rotatable plates. Can fit miscellaneous tools and hair accessories. Dimensions D40x 83cmH. Iron material.

demolition breaker bar available

Vintage Ward Draw Knife. the handles are firm, cracks on them. Please text mobile only.

olde stanley plain available

A DA2 arbor with TCT pilot bit for Sutton diamond holesaws from 32 to 152 mm. Set up compatible larger Sutton diamond holesaws with the correct arbor and pilot. The power-groove shank provides a positive fit in a 13 mm chuck for controlled starting. Features: - Suits compatible 32-152 mm Sutton diamond holesaws. - Includes a tungsten-carbide-tipped pilot bit. - 5/8-18 UNF arbor thread. - 7/16-inch power-groove shank for a 13 mm chuck. Condition: Brand new, unused, complete and sealed in the o

An 89 mm tungsten-carbide-tipped multi-purpose holesaw for a range of building materials. Cut an 89 mm opening through suitable timber and building-sheet materials with three carbide cutting edges and a deep-gullet design. The package calls for the compatible WHC10 pilot drill/arbor system. Features: - 89 mm / 3-1/2-inch cutting diameter. - Three tungsten-carbide cutting edges. - 13 mm chuck requirement shown on the package. - Use with the WHC10 pilot drill/arbor; not included in this sale. C

A 10 x 20 mm double-cut tree-radius carbide burr on a 1/4-inch shank. Work into contours and rounded transitions with a solid-carbide tree-radius profile. The double-cut teeth are intended for rapid, controlled stock removal in harder materials. Features: - 10 mm diameter x 20 mm cutting length. - Tree-radius profile for contouring and blending. - Double-cut tooth geometry reduces chips to a granular form. - Solid carbide head with 1/4-inch S45C steel shank. Condition: Brand new, unused, comp

A 12 x 25 mm double-cut cylindrical-radius carbide burr on a 1/4-inch shank. Shape and remove material efficiently in harder metals with a double-cut solid-carbide burr. The cylindrical radius form combines straight-side cutting with a rounded end for controlled transitions. Features: - 12.7 mm diameter x 25 mm cutting length. - Cylindrical radius-end profile. - Double-cut tooth pattern for rapid stock removal. - Solid carbide head with 1/4-inch S45C steel shank. Condition: Brand new, unused,

Vintage Double Blade Wood Plane. Some cracks on it. Refer to photos for details. Please text mobile only.

An 8 mm vacuum-brazed diamond core bit with a wax-filled core for dry cutting. Drill clean 8 mm holes in suitable hard surfaces with a vacuum-brazed diamond edge and wax-filled core. The 10 mm hex shank gives positive drive in a compatible chuck. Features: - 8 mm diamond core bit for precision holes. - Vacuum-brazed #40 diamond grit. - Wax-filled core supports dry-cut operation. - 10 mm hex shank; use below 3,000 RPM. Condition: Brand new, unused, complete and sealed in the original factory p

Jaws show signs of use, shifter has dints and marks. Shifter in working order.

A high-speed-steel 90-degree cross-hole tool for deburring 10-15 mm work. Produce clean, controlled deburring and countersinking work across the stated 10-15 mm range. The cross-hole geometry is designed to reduce chatter and leave a cleaner finish in suitable materials. Features: - 10-15 mm cutting range. - 90-degree cross-hole HSS design. - Suitable for workshop deburring and light countersinking tasks. - Genuine PandN by Sutton Tools retail pack. Condition: Brand new, unused, complete and

Atlas Copco 1/2" pneumatic Impact wrench In very good condition Made in Japan Forward and reverse With speed selector Check out my other listings for a bargain Pick up from Keysborough 3173 Cash on pic up

25 meters heavy duty extension lead. pick up from 4109

Precise everyday measurement with a clear digital readout and protective hard case. This digital vernier caliper brings metric, imperial and fractional readings into one compact workshop tool. Its zero-at-any-position function and thumb-roll adjustment are designed to make repeat measurements straightforward, while the supplied hard case helps keep it protected between jobs. Features: - Hardened stainless steel frame - Metric, inch and fractional measurement modes - Large LCD display with zero

A compact digital gauge for tyre-tread measurement from 0 to 25 mm with 0.01 mm resolution. Ensure your tyres are in top condition with the Kincrome Digital Tyre Depth Gauge K8640. Precision crafted by Kincrome, this digital gauge provides accurate readings to help you maintain the optimal depth of your tyres. With its easy-to-read digital display, checking your tyre tread has never been simpler or more reliable. Features: - Accurate digital measurement for precise tread depth readings - Insta

Large Dawn No.250 Wood Working Vice with Quick Release is in good working condition. Please text mobile only.

Adaptors 3/4" TO 1/2" Drive Brand New Made in USA – Australia – Japan $45 For The Lot Check out my other listings for a bargain Pick up from Keysborough 3173 Cash on pick up

Specification: Upright mode: Max carry weight 200 kg 35 degree mode: Max carry weight 280 kg Platform mode: Max carry weight 350 kg Staircase Clibming mode: Max carry weight 150 kg Features: 3-IN-1 Heavy Duty Convertible Design wiith Materials Durable aluminum construction body & Steel handle 6-wheel Stair Climbing & 2 x solid PVC support wheels (5 inch diameter/each) Light weight & Compact design, only about 15kg Convertible design of hand truck or platform push trolley 35 degree convertible m

4 small hand planes all in perfect, working condition. Left to right 1st is a Stanley block plane number 110 and is $65 2nd and 3rd are unmarked block planes but the 3rd is slightly larger than the second. $55, $60 4th one is a rare Number 90J Stanley Block plane all original and is $125.

Vintage Chain Pipe Vice / Plumber's Pipe Clamp - Industrial Tool Vintage heavy-duty chain pipe vice mounted on a timber base. A great piece of old workshop equipment, ideal for: Pipe holding and threading Restoration projects Blacksmith or engineering workshops Industrial decor or man cave display Vintage tool collectors Features: Cast metal construction Adjustable toothed jaws Heavy chain clamp Original timber mounting board Solid and heavy Operates as intended, although would benefit fro

Selling my flank drive spanner set as l no longer have a use for them Brand new $1500 Negotiable Pick up kogarah